CUSTOMISATION FUNCTION


By operating the M.U.T.-III ETACS system, the following functions can be customised. The programmed information is held even when the battery is disconnected.
Adjustment item (M.U.T.-III display)
Adjustment item
Adjusting content (M.U.T.-III display)
Adjusting content
Turn power source
Adjustment of turn-signal lamp operation condition
ACC or IG1
Operable with ACC or ON position
IG1
Operable with ON position (initial condition)
Comfort flasher
With/without comfort flasher function
Disable
No function
Enable
With function (initial condition)
Hazard answer back
Adjustment of the number of keyless hazard warning lamp answer back flashes
Lock: 1, Unlock: 2
LOCK: Flashes once, UNLOCK: Flashes twice (initial condition)
Lock: 1, Unlock: 0
LOCK: Flashes once, UNLOCK: No flash
Lock: 0, Unlock: 2
LOCK: No flash, UNLOCK: Flash twice
Lock: 2, Unlock: 1
LOCK: Flash twice, UNLOCK: Flash once
Lock: 2, Unlock: 0
LOCK: Flash twice, UNLOCK: No flash
Lock: 0, Unlock: 1
LOCK: No flash, UNLOCK: Flash once
Lock: 0, Unlock: 0
No function
Front wiper operation
Adjustment of the intermittent windshield wiper operation <vehicles without lighting control sensor>
Normal INT
Intermittent wiper interval is fixed to 4 seconds.
Variable INT
Intermittent wiper interval is calculated only by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed (initial condition).
Adjustment of the intermittent windshield wiper operation <vehicles with lighting control sensor>
Normal INT
Intermittent wiper interval is fixed to 4 seconds.
Variable INT
Intermittent wiper interval is calculated only by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed.
Rain Sensitive
Intermittent wiper interval is calculated according to the intermittent wiper volume control and lighting control sensor (initial condition).
Front/rear wiper washer
Disabling or enabling washer-linked wiper function
Only Washer
No function
Washer & Wiper
With function: Without delayed finishing wipe function
With after wipe
With function: With delayed finishing wipe function (Initial condition)
Intermittent time of rear wiper
Adjustment of rear wiper interval
0 sec.
No wiper interval
4 sec.
4 seconds
8 sec.
8 seconds (initial condition)
16 sec.
16 seconds
Rear wiper Low speed mode
Disabling or enabling rear wiper continuous operation
Disable
No function
Enable
With function (initial condition)
Sensitivity for auto lamp
Lighting control sensor sensitivity (illumination intensity) <vehicles with lighting control sensor>
Level 1 bright
High-high ambient brightness
Level 2 bright
High ambient brightness
Level 3
Standard ambient brightness (initial condition)
Level 4 dark
Low ambient brightness
Level 5 dark
Low-low ambient brightness
Room lamp delay timer with door
Adjustment of interior lamp delay shutdown time
0 sec.
0 second (no delay shutdown time)
7.5 sec.
7.5 seconds
15 sec.
15 seconds (initial condition)
30 sec.
30 seconds
60 sec.
60 seconds
120 sec.
120 seconds
180 sec.
180 seconds
Head lamp auto cut customise
Adjustment of headlamp automatic shutdown function
Disable
No function
Enable (B-spec.)
With function (initial condition)
Interior lamp auto cut timer
Adjustment of interior lamp automatic shutdown function operation time
Disable
No function
3 min
3 minutes
30 min
30 minutes (initial condition)
60 min
60 minutes
Comfort flasher switch time
Switch operation time to activate the comfort flasher function
Normal
0.4 second (initial condition)
Long
0.8 second
Intelligent/Comfort washer
With/without Comfort washer function
Disable
No function
Enable
With function (Initial condition)
Auto door unlock
Adjustment of the auto door unlock function
Disable
Without function (initial condition)
Always (P pos)
With function: Operates when the shift lever or the selector lever is moved to the P position.
Always(Lock pos)
With function: Operates when the ignition switch is moved to the LOCK (OFF) position.
Door unlock mode
Adjustment of power door locks with selective unlocking
All Doors Unlock
Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors (initial condition).
Dr Door Unlock
With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver’s door only, and the second unlock operation within 2 seconds after that unlocks all doors.
Buzzer answer back
Adjusts the buzzer answer back function. <Vehicles with KOS>
Not sound buzzer
Without function
At keyless
Sounds when the keyless entry system is activated.
At KOS
Sounds when KOS is activated (initial condition).
At Both
Sounds when the keyless entry system or KOS is activated.
Timer lock timer
Timer lock period adjustment
30 sec.
30 seconds (initial condition)
60 sec.
60 seconds
120 sec.
120 seconds
180 sec.
180 seconds
Duration of pre-alarm
Adjustment of pre-alarm (interior alarm) continue time <Vehicles with security alarm (vehicles without security alarm sensor)>
10 sec.
10 seconds (initial condition)
6 sec.
6 seconds
Rear wiper(linked reverse gear)
Adjustment of automatic rear window wiper operation with reverse gear engaged
Enable(R wip.ON)
Operates only when the rear wiper switch is ON.
Enable(R/F wip.)
Operates only when the front or rear wiper switch is ON (initial condition).
KOS key detect out from window
With/without KOS key exterior detection function <Vehicles with KOS>
Enable
No function
Disable
With function (initial condition)
KOS feature
KOS function adjustment <Vehicles with KOS>
Both enable
All KOS functions are enabled (initial condition).
Door Entry enable
Only door entry function is enabled.
ENG start enable
Only engine starting function is enabled.
Both disable
All KOS functions are disabled.
KOS unlock disable time
Adjusts the door unlock inhibition period after door lock is activated. <Vehicles with KOS>
0 sec.
0 second
3 sec.
3 seconds (Initial condition)
5 sec.
5 seconds
ACC power auto cut
Time to ACC power cut-off when the ignition switch is in the ACC position
Disable
No function
30 min
30 minutes (initial condition)
60 min
60 minutes
Sensitivity for security sensor
Sensitivity level setting of security alarm sensor <Vehicles with security alarm (vehicles with security alarm sensor)>
Level 1
100% sensitivity of security alarm sensor (initial condition)
Level 2
90% sensitivity of security alarm sensor
Level 3
80% sensitivity of security alarm sensor
Level 4
70% sensitivity of security alarm sensor
Coming home light
Disabling or enabling coming home light function
Disable
No function
15 sec.
The headlamps illuminate for 15 seconds.
30 sec.
The headlamps illuminate for 30 seconds. (initial condition)
60 sec.
The headlamps illuminate for 60 seconds.
180 sec.
The headlamps illuminate for 180 seconds.
Welcome light
Disabling or enabling welcome light function
Disable
No function
Small lamp
The tail lamps illuminate. <initial condition>
Head lamp
The headlamps illuminate.
Outer buzzer volume
KOS outer buzzer volume adjustment <Vehicles with KOS>
Volume 1
Quieter than the standard
Volume 2
Standard volume (Initial condition)
Volume 3
Louder than the standard
A/C Recirculation Control
With/without inside/outside air automatic control function
Disable
No function
Enable
With function (Initial condition)
A/C Switch Control
With/without A/C automatic control function
Disable
No function
Enable
With function (Initial condition)
A/C Sensible temp. customize
Adjusting mean value for temperature setting
-2
Decreases the control temperature two degrees than the temperature displayed on the LCD.
-1
Decreases the control temperature one degree than the temperature displayed on the LCD.
0
No change (Initial condition)
1
Increases the control temperature one degree than the temperature displayed on the LCD.
2
Increases the control temperature two degrees than the temperature displayed on the LCD.
FOOT / DEF Air outlet ratio
Changes air distribution rate for DEF/FOOT vents during manual operation.
Normal
D/F2 (Initial condition)
FOOT > DEF
D/F1(more to FOOT vent): More air flows through FOOT vents.
FOOT < DEF
D/F3(more to DEF vent): More air flows through DEF vents.
FACE / FOOT Air outlet ratio
Changes air distribution rate for FACE/FOOT vents during manual operation.
Normal
B/L2 (Initial condition)
FACE > FOOT
B/L1(more to FACE vent): More air flows through FACE vents.
FACE < FOOT
B/L3(more to FOOT vent): More air flows through FOOT vents.
Auto Rear Defogger(Engine Start)
Activates the rear window defogger when the ambient temperature is low.(The rear window defogger has never been activated since the ignition switch was turned on last time)
Disable
No function (Initial condition)
Enable
With function
Gate auto open by Handle SW
Opening operation by using the gate handle switch
Disable
No function
Enable
With function (Initial condition)