caution |
- When the ETACS-ECU of vehicles without
KOS is replaced, the encrypted code of the ignition
key needs to be registered to the ETACS-ECU.
(If the encrypted code is not registered, the engine
cannot be started. Register the encrypted
code as described in Immobilizer System - How
to Register Key ID
.)
- When the ETACS-ECU is replaced, chassis number
writing and coding must be performed.
When diagnosis code No.B1761
"Chassis No. not programmed" or No.B222C
"Coding not completed"
is set to the ETACS-ECU, perform chassis number
writing and coding. Refer to the "M.U.T.-III
operation
manual" and perform coding.
- When the ETACS-ECU is replaced, initialise the
ETACS-ECU (headlamp automatic levelling system)
using M.U.T.-III (Refer to
).
|