CHECK WITH TERMINAL VOLTAGE




CONNECTOR: C-401




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 Not used
2
 DUL2
 Output to central door locking (for unlocking the passenger’s door)
 When the door lock actuators unlock the passenger’s door
 System voltage
3
 LP+3
 Ignition key cylinder illumination lamp output (high side)
 When the ignition key cylinder illumination lamp is ON
4
 Not used
5
 DUN
 Output to central door locking (for unlocking the driver’s door)
 When the door lock actuators unlock the driver’s door
 System voltage
6
 DLK1&DLK2
 Output to central door locking (for locking the doors)
 When the door lock actuators lock the doors
7
 ASK2
 Power supply (fuse No. 23)
 Ignition switch: ACC
8
 CIG1
9
 MUT
 Power supply (fuse No. 11)
 Always

CONNECTOR: C-402




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 TL2-2
 Side turn-signal lamp (LH) output <door mirror type>
 When side turn-signal lamp (LH) is ON
 System voltage
2
 IG1
 Power supply from ignition switch (IG1)
 Ignition switch: ON or START
3
 Not used
4
 ACC
 Ignition switch (ACC) input
 Ignition switch: ACC
 System voltage
5
 IG11
 Power supply (fuse No. 15)
 Ignition switch: ON
6
 TAR3
 Tail lamp (RH) output
 When tail lamps are ON
7
 DLIP
 Not used
8
 Not used

CONNECTOR: C-403




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 GND
 Earth
 Always
 1 V or less
2
 RAD1
 Power supply (fuse No. 17)
 Always
 System voltage
3
 BUP1
 Power supply (fuse No. 18)
 Always
4
 TR2-2
 Side turn-signal lamp (RH) output <door mirror type>
 When side turn-signal lamp (RH) is ON
5
 IG+
 Power supply (fuse No. 10)
 Always
6 - 9
 Not used
10
 ROOM
 Combination meter power supply
 Always
 System voltage

CONNECTOR: C-404




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 HTR
 Blower motor output
 Blower motor in operation
 System voltage

CONNECTOR: C-405




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 LIN2
 LIN communication line
 Always
 0 to 12 V (pulse signal)
2
 RLP-
 Room lamp output (low side)
 When room lamp is ON (duty)
 Pulse signal
3
 LP+1
 Room lamp output (high side)
 When the room lamp is ON
 System voltage
4 - 5
 Not used
6
 SR+
 Power supply (fuse No. 9)
 Always
 System voltage
7
 Not used

CONNECTOR: C-410




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 +B2
 Battery 2
 Always
 System voltage
2
 +B1
 Battery 1
 Always

CONNECTOR: C-412




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 F/PB
 Fuel pump power supply input
 Ignition switch: ON
 System voltage
2
 IODI
 +B power supply input
 Always

CONNECTOR: C-413




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 4WDF
 Power supply (fuse No. 13)
 Always
 System voltage
2
 RWLO
 Output to rear wiper
 When rear wiper is operating
3
 RWF
 Rear wiper motor output
 When rear wiper is operating
4
 STLO
 Stop lamp switch power supply
 When tail lamp and high-mounted stop lamp is ON
5
 DLK3&DLK4
 Rear door lock output
 When rear door is locked
6
 Not used
7
 DUL3&DUL4
 Rear door unlock output
 When rear door is unlocked
 System voltage
8
 RWAS
 Rear wiper auto stop switch input
 When rear wiper is operating

CONNECTOR: C-414




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 DEFL
 Power supply (fuse No. 2)
 Ignition switch: ON
 System voltage
2
 F/P
 Fuel pump output
 Engine: Started
3
 Not used

CONNECTOR: C-415




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 SBR
 Rear height sensor power supply
 Ignition switch: ON
 4.2 to 5.7 V
2 - 8
 Not used
9
 DDR
 Front door switch (LH) input
 Front door switch (LH): ON (door open)
 1 V or less
10
 DAS
 Front door switch (RH) input
 Front door switch (RH): ON (door open)
11
 DRH
 Rear door switch (RH) input
 Rear door switch (RH): ON (door open)
12
 IG12&IG16
 Power supply (fuse No. 15)
 Ignition switch: ON
 System voltage
13
 BLP+
 Power supply (fuse No. 20)
 Ignition switch: ON
14
 BUP2
 Power supply (fuse No. 18)
 Always
15
 SHR
 Input from the rear height sensor
 Ignition switch: ON
 0.5 to 4.5 V
16
 Not used
17
 SGR
 Rear height sensor earth
 Always
 1 V or less
18
 GTOP
 Input from tailgate lock release handle
 Tailgate lock release handle: ON
19
 TRID
 Input from tailgate lock release handle
 Tailgate lock release handle: ON
20
 DLH
 Rear door switch (LH) input
 Rear door switch (LH): ON (door open)
21 - 22
 Not used

CONNECTOR: C-416




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 Not used
2
 SHF
 Input from the front height sensor
 Ignition switch: ON
 0.5 to 4.5 V
3
 SGF
 Front height sensor earth
 Always
 1 V or less
4
 AMB-
 Earth (ambient temperature sensor)
 Always
5
 MGL
 Headlamp levelling unit (LH) earth
 Always
6
 MGR
 Headlamp levelling unit (RH) earth
 Always
7
 SBF
 Rear height sensor power supply
 Ignition switch: ON
 4.2 to 5.7 V
8
 HWA
 Headlamp washer output
 When headlamp washer is ON
 1 V or less
9
 AMB+
 Ambient temperature sensor input
 Always
 0.2 - 2.72 V
10
 Not used
11
 HLO
 Headlamp (LO) output
 When headlamp (LO) is ON
 1 V or less
12
 IG12&IG16
 Power supply (fuse No. 15)
 -
 -
13
 F/HI
 Cooling fan (HI) output
 When cooling fan HI is operating
 1 V or less
14 - 15
 Not used
16
 N.HO
 Output to horn
 When horn sounds
 1 V or less
17
 HORN
 Output to security alarm horn
 When security alarm horn sounds
18
 HHI
 Headlamp (HI) output
 When headlamp (HI) is ON
19
 HOOD
 Input from hood latch switch
 Hood latch switch: ON (hood open)
20
 BFSW
 Brake fluid switch input
 Brake fluid switch: ON
21 - 22
 Not used
23
 F/LO
 Cooling fan (LO) output
 When cooling fan LO is operating
 1 V or less
24
 MBL
 Headlamp levelling unit (LH) power supply
 Ignition switch: ON
 System voltage
25
 MBR
 Headlamp levelling unit (RH) power supply
 Ignition switch: ON
26
 MSL
 Output to the headlamp levelling unit (LH)
 Ignition switch: ON
 When the levelling motor is stopped
 1 V or less
When the levelling motor is operating
 16% to 84% of system voltage
27
 MSR
 Output to the headlamp levelling unit (RH)
 Ignition switch: ON
 When the levelling motor is stopped
 1 V or less
When the levelling motor is operating
 16% to 84% of system voltage
28
 Not used

CONNECTOR: C-417




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 5V
 Power supply (5V)
 Always
 5 V
2
 SIGR
 Keyless entry system signal output
 Always
 0 to 5 V (pulse signal)
3
 PWRC
 Receiver antenna module (door entry) power control
 Ignition switch: ON
 System voltage
4
 SIGI
 Immobilizer signal input/output
 When immobilizer authentication (When insert ignition key to ignition switch or turn ignition switch from ACC to ON.)
 0 to 5 V (pulse signal)
5
 CLOCK
 Immobilizer CLOCK input
 When immobilizer authentication (When insert ignition key to ignition switch or turn ignition switch from ACC to ON.)
6
 SRSF
 Power supply (fuse No. 16)
 Ignition switch: ON
 System voltage
7 - 8
 Not used
9
 DST+
 Cruise control switch (ACC distance) input
 Cruise control switch (ACC distance): ON
 1 V or less
10
 Not used
11
 DDUK
 Input to driver’s door lock actuator (unlock)
 Driver’s door lock: Unlocked
 1 V or less
12
 FIOS
 Not used
13
 FCMS
 FCM switch input
 FCM switch: ON
 1 V or less
14
 LITI
 LIN communication line
 Always
 0 to 12 V (pulse signal)
15
 ASCS
 ASC off switch input
 ASC off switch: ON
 1 V or less
16
 CNML
 CAN-C-Mid_L
 -
17
 CNMH
 CAN-C-Mid_H
18
 CANL
 CAN-C_L
19
 CANH
 CAN-C_H
20
 Not used
21
 DATA
 LIN communication line
 Always
 0 to 12 V (pulse signal)
22
 AVCC
 Not used
23
 ASIG
24
 WB/U
 Windshield wiper backup input
 Windshield low-speed wiper switch or windshield high-speed wiper switch: ON
 1 V or less
25
 Not used
26
 HAZ
 Hazard switch input
 Hazard switch: ON
 1 V or less
27
 ADUK
 Input to front passenger’s door lock actuator (unlock)
 Front passenger’s door lock: Unlocked
28
 D-LS
 Door lock switch (lock) input
 Power window main switch (door lock switch): Lock
29
 Not used
30
 HL1+
 Input to key reminder switch
 Key reminder switch: ON (ignition key removed)
 1 V or less
31
 D-US
 Door lock switch (unlock) input
 Power window main switch (door lock switch): Unlock
32
 SEC
 Output to security indicator lamp
 When security indicator lamp is on
33 - 34
 Not used
35
 AGND
 Not used
36
 GND
 Earth
 Always
 1 V or less

CONNECTOR: C-418




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1 - 2
 -
 -
 -
 -
3
 TAR2
 Tail lamp (RH) output
 When tail lamps are ON
 System voltage
4
 GLK
 Tailgate lock release handle output
 Tailgate lock release handle: ON
5
 TL3-1&TL3-2
 Rear turn-signal lamp (LH) output
 When rear turn-signal lamp (LH) is ON
6
 TAL2
 Tail lamp (LH) and licence plate lamp output
 With tail lamp and licence plate lamp illuminated
7
 Not used
8
 PWS
 Rear power window sub switch power supply
 Ignition switch: ON
 System voltage
9
 DEAD
 Not used
10
 RFOG
11
 TR3
 Rear turn-signal lamp (RH) output
 When rear turn-signal lamp (RH) is ON
 System voltage
12
 BLP2
 Inhibitor switch power supply
 When back-up lamp is ON
13
 GLP-
 Output to luggage compartment lamp
 When luggage compartment lamp is illuminated

CONNECTOR: C-419




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 IGN
 Engine ECU (IG1) output
 Ignition switch: ON
 System voltage
2
 WACC
 Windshield wiper (ACC) output
 Ignition switch: ACC
3
 BKLP
 Input from stop lamp switch
 Stop lamp switch: ON
 5 V
4
 FOGY
 Output to fog lamps
 Fog lamp switch: ON
 1 V or less
5
 ST2
 Ignition switch (START) switch output
 Ignition switch: START
 System voltage
6
 WASH
 Output to windshield washer
 When windshield washer is operating
7
 W.WA
 Rear washer output
 When rear washer is operating
8
 W.AS
 Windshield wiper auto stop switch input
 When windshield wipers are operating
9
 TR1&TR2-1
 Front turn-signal lamp and side turn-signal lamp (RH) <fender panel type> output
 With front and side turn-signal lamp (RH) illuminated
10
 TL1&TL2-1
 Front turn-signal lamp and side turn-signal lamp (LH) <fender panel type> output
 With front and side turn-signal lamp (LH) illuminated
11
 FP/R
 Engine ECU (fuel control) input
 Engine: Started
 1 V or less

CONNECTOR: C-420




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1 - 2
 Not used
3
 PWMB
 Power supply (fusible link No. 1)
 Ignition switch: ON
 System voltage
4 - 7
 Not used
8
 HOSW
 Horn switch input
 Horn switch: ON
 1 V or less
9
 ST
 Ignition switch (START) input
 Ignition switch: START
 System voltage
10
 SGND
 Earth
 Always
 1 V or less
11
 Not used
12
 PWM
 Power supply (fusible link No. 20)
 Ignition switch: ON
 System voltage
13
 ACC1
 Power supply (fuse No. 22)
 Ignition switch: ACC

CONNECTOR: C-421




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 STLD
 Stop lamp drive signal
 The ACC or the FCM activates, and the stop lamps illuminate.
 System voltage
2
 W.HI
 Windshield wiper (HI) output
 When windshield wipers are operating at high speed
3
 TAR1
 Position lamp (RH) output
 With position lamp ON
4
 Not used
5
 BUP4
 Power supply (fuse No. 18)
 Ignition switch: ON
 System voltage
6
 STP
 Stop lamp switch power supply
 Stop lamp switch: ON
7
 W.LO
 Windshield wiper (LO) output
 When windshield wipers are operating at low speed
8
 TAL1
 Position lamp (LH) output
 With position lamp ON
9
 BLP1
 Inhibitor switch (R) input
 Selector lever: R and ignition switch: ON
10
 Not used

CONNECTOR: C-422




Terminal No.
 Terminal code
 Check item
 Check condition
 Normal condition
1
 SLSO
 Shift lock solenoid
 When all the following conditions are met.

  • Ignition switch: ON
  • Brake pedal: depressed
 System voltage