Code No.U0121 ABS/ASC CAN timeout
caution |
- If the diagnosis code No. U0121 is set, be sure to diagnose the CAN bus line.
- Before replacing the ECU, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.
|
DIAGNOSTIC FUNCTION
When the LDW-ECU receives no signal from the ASC-ECU for 2.5 seconds or more, it will set diagnosis code No. U0121.
JUDGEMENT CRITERIA
When the LDW-ECU receives no signal from the ASC-ECU for 2.5 seconds or more, it will determine that the system is defective.
PROBABLE CAUSES
- Malfunction of the CAN bus
- Malfunction of ASC-ECU
- ASC-ECU power supply circuit malfunction
- Malfunction of the LDW-ECU
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-III CAN bus diagnostics
Use the M.U.T.-III to diagnose the CAN bus lines.
Q.
Is the check result normal?
Go to Step 2.
Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting
). On completion, go to Step 2.
STEP 2. M.U.T.-III other system diagnosis code
Check if diagnosis code is set in the ASC-ECU.
Q.
Is the diagnosis code set?
Troubleshoot the ASC. Refer to GROUP 35C - Troubleshooting.
Go to Step 3.
STEP 3. Check the M.U.T.-III Diagnosis code for other systems
Check if a diagnosis code, which relates to CAN communication-linked systems below, is set.
ETACS-ECU
- Code No.U0121: ABS/ASC CAN timeout
Q.
Is the diagnosis code set?
Go to Step 4.
Go to Step 5.
STEP 4. Check whether the diagnosis code is set again.
Check again if the diagnosis code is set in the LDW-ECU.
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
|
|
(3)Check if diagnosis code is set.
|
Q.
Is the diagnosis code set?
Replace the ASC-ECU.
The trouble can be an intermittent malfunction such as a poor connection or open circuit in the CAN bus lines between the ASC-ECU and the LDW-ECU (GROUP 00 - How to use Troubleshooting/inspection Service Points - How to Cope with Intermittent Malfunction).
STEP 5. Check whether the diagnosis code is set again.
Check again if the diagnosis code is set in the LDW-ECU.
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
|
|
(3)Check if diagnosis code is set.
|
Q.
Is the diagnosis code set?
Replace the LDW-ECU.
The trouble can be an intermittent malfunction such as a poor connection or open circuit in the CAN bus lines between the ASC-ECU and the LDW-ECU (GROUP 00 - How to use Troubleshooting/inspection Service Points - How to Cope with Intermittent Malfunction).