CODE No. C2329
Radar PWR.supply VOLT(Above 16V)
caution |
Before replacing the ECU,
ensure that the power supply circuit, the earth circuit and the communication circuit are normal.
|
OPERATION
BSW-ECU (master) power supply is provided from the battery via ETACS-ECU.
CHECK CONDITION
Ignition switch is in the ON position.
DIAGNOSTIC FUNCTION AND JUDGEMENT CRITERIA
When system voltage remains 16V or more, the BSW-ECU (master) will set diagnosis code No.C2329.
PROBABLE CAUSES
- Battery failure
- Malfunction of charging system
- Malfunction of BSW-ECU (master)
DIAGNOSIS PROCEDURE
STEP 1. Check the charging system.
Refer to GROUP 16 - On-vehicle Service - Regulated Voltage Test.
Q.
Is the check result normal?
Go to Step 2
Repair or replace the charging system component(s).
STEP 2. Check whether the diagnosis code is set again.
Check again if the diagnosis code is set in the BSW-ECU (master).
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from the LOCK (OFF) position to the ON position.
|
|
(3)Check if the diagnosis code is set.
|
Q.
Is the diagnosis code set?
Replace the BSW-ECU (master).
Intermittent malfunction is suspected (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection Service Points - How to cope with Intermittent Malfunction).