DISASSEMBLY AND REASSEMBLY






Disassembly steps

>>E<<
 ·
 Air gap adjustment
<<A>>
 >>D<<
 1.
 Self-locking nut


2.
 Armature


3.
 Shim

>>C<<
 4.
 Snap ring
<<B>>
 >>B<<
 5.
 Rotor


6.
 Snap ring

>>A<<
 7.
 A/C compressor coil

DISASSEMBLY SERVICE POINT
For disassembly service point, follow the same service procedures as before.

REASSEMBLY SERVICE POINTS
The reassembly service points other than "Air gap adjustment" are the same as before.

>>E<< AIR GAP ADJUSTMENT

Check whether or not the air gap of the clutch is within the standard value.
Standard value:
    0.20 - 0.45 mm
note If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.