REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Discharging and Recharging refrigerant.
  • Air Cleaner Intake Duct (Refer to GROUP 15 - Air Cleaner).
  • Headlamp support upper panel cover (Refer to GROUP 51, Radiator Grille)
  • Hood latch (Refer to GROUP 42A - Hood).
  • Headlamp support panel upper (Refer to GROUP 42A - Loose Panel).
  • Air guide panel (Refer to GROUP 42A - Loose Panel ).




Removal steps
<<A>>
 >>A<<
 1.
 A/C compressor discharge hose connection


2.
 O-ring


3.
 Clamp
<<A>>
4.
 A/C condenser outlet pipe connection


5.
 O-ring


6.
 Condenser assembly
note Condenser fan removal and installation refer to GROUP 14 - Radiator.

REMOVAL SERVICE POINT

<<A>> A/C COMPRESSOR DISCHARGE HOSE AND A/C CONDENSER OUTLET PIPE DISCONNECTION
caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and condenser to prevent the entry of dust and dirt.

INSTALLATION SERVICE POINT

>>A<< A/C COMPRESSOR DISCHARGE HOSE INSTALLATION
Assemble the clamp into the condenser assembly, and then assemble the A/C condenser discharge hose into the clamp.