|
If the blower motor is not energised, the blower relay system is suspected.
|
|
- Malfunction of the blower relay
- Damaged wiring harness or connectors
- Malfunction of the ETACS-ECU
|
|
(1)Remove the relay, and measure at the junction block side.
|
|
(2)Voltage between terminals 1, 4 and body earth OK: System voltage
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunction ).
|
|
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Check that the blower motor is energised.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunction ).
|
|
|