TREATMENT BEFORE/AFTER THE FORDING OF A STREAM
INSPECTION AND SERVICE BEFORE FORDING A
STREAM
Vehicles which are driven through water, or which may
possibly be driven through water, should be subjected to the following
inspections and maintenance procedures in advance.
- Inspect the dust boot and breather hose for cracks or damage,
and replace them if cracks or damage are found.
INSPECTION AND SERVICE AFTER FORDING A
STREAM
After fording a stream, check the following points.
If abnormal conditions is evident, clean, replace or
lubricate.
- Check of water, mud, sand, etc. in the rear brake drum, clutch
housing, starter motor, brake pipe and fuel pipe.
- Check for water in the fluid or oil inside the front
differential, rear differential, transmission and
transfer.
- Check all boots and breather hoses for cracks and
damage.
