![](../../../img/00/AC608423AB00ENG.png)
![](../../../img/00/AC505420AD00ENG.png)
|
Connect the M.U.T.-III to the
16-pin diagnosis connector, and read the diagnosis
code.
note |
For details on how to use the
M.U.T.-III, refer to the
"M.U.T.-III operation manual."
|
1.Ensure that the ignition switch is at the
"LOCK" (OFF) position. 2.Start up the personal
computer. 3.Connect special tool M.U.T.-III USB
cable (MB991827) to V.C.I. (MB991824) and the personal
computer. 4.Connect special tool M.U.T.-III main
harness A (MB991910) to the V.C.I. 5.Connect the
M.U.T.-III main harness A to the diagnosis connector of the
vehicle. 6.Turn the V.C.I. power switch to the
"ON" position.
note |
When the V.C.I. is energized,
the V.C.I. indicator lamp will be illuminated in
a green colour.
|
7.Start the M.U.T.-III system on the personal
computer and turn the ignition switch to the "ON"
position. 8.Read the diagnosis
code. 9.Disconnecting the M.U.T.-III is the
reverse of the connecting sequence, making sure that the
ignition switch is at the "LOCK" (OFF) position.
|
![](../../../img/00/AC608423AB00ENG.png)
![](../../../img/00/AC505420AD00ENG.png)
|
Connect the M.U.T.-III to the
diagnosis connector, and erase the diagnosis code. The
procedure is the same as "How to Read Diagnosis Code ."
|