SPECIAL TOOLS


Tool
 Number
 Name
 Use


MB992080

    A: MB992081
    B: MB992082
 Belt tension meter set

    A: Belt tension meter
    B: Mic assembly
 Alternator & others belt tension check


MB991955

    A: MB991824
    B: MB991827
    C: MB991910
    D: MB991911
    E: MB991825
    F: MB991826
 M.U.T.-III sub assembly

    A: Vehicle communication interface (V.C.I.)
    B: M.U.T.-III USB cable
    C: M.U.T.-III main harness A (Vehicles with CAN communication system)
    D: M.U.T.-III main harness B (Vehicles without CAN communication system)
    E: M.U.T.-III measurement adapter
    F: M.U.T.-III trigger harness
  • Alternator & others belt tension check
  • Checking the ignition timing
  • Checking the idle speed
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.



MD998299
 MAS screw driver
 Idle speed and mixture check and adjustment <Vehicles without catalytic converter>


MB991800
 Pulley holder
 Holding the crankshaft pulley


MB991802
 Pin


MB990767
 Front hub and flange yoke holder
 Holding the camshaft sprocket


MD998715
 Pin


MD998713
 Camshaft oil seal installer
 Camshaft oil seal installation


MB991559
 Camshaft oil seal installer adapter
 Camshaft oil seal installation (left bank side)


MD998443
 Lash adjuster holder
 Supporting the rocker arm lash adjuster


MD998772
 Valve spring compressor
 Compressing valve spring


MB991999
 Valve stem seal installer
 Valve stem seal installation


MD998781
 Flywheel stopper
 Supporting the flywheel <M/T> or A/T drive plate <A/T>


MD998718
 Crankshaft rear oil seal installer
 Crankshaft rear oil seal installation


MD998717
 Crankshaft front oil seal installer
 Crankshaft front oil seal installation


MD998051
 Head bolt wrench
 Removal and installation of cylinder head bolt


MD998767
 Tensioner wrench
 Valve timing belt tension adjustment


MD998769
 Crankshaft sprocket spacer
 Rotating the crankshaft when installing the valve timing belt


MB991454
 Engine hanger balancer
 Removal and installation of engine assembly
note Special tool MB991454 is a part of engine hanger attachment set MB991453.


MB991527
 Hanger