|
1.Before inspection, set the
vehicle to the pre-inspection condition. 2.Turn
the ignition switch to "LOCK" (OFF)
position. 3.Connect the M.U.T.-III to the
diagnosis connector.
|
|
4.Attach a three-way union
to the vacuum hose between the fuel pressure regulator and
the
air intake plenum, and connect a vacuum
gauge. 5.Start the engine and check that idle
speed is within the standard valve. Standard
value: 700 ± 100 r/min 6.Check the
intake manifold vacuum. Limit: Minimum 65
kPa 7.Turn the ignition switch to the
"LOCK" (OFF) position. 8.Remove the vacuum gauge
and then connect the vacuum hose. 9.Remove the
M.U.T.-III.
|