|
1.Before inspection, set the
vehicle to the pre-inspection condition.
|
|
2.
caution |
When the speedometer is
connected to the injection pipe,
the pipe mounting clamps should all be
removed.
|
Connect the speedometer to the injection nozzle ore
the injection pipe. 3.Start the engine and run it
at idle. 4.Check the idle
speed. Standard value: 750 ± 100
r/min
|
|
5.If not within the standard
value, loosen idle adjusting screw lock nut and adjust the
idle speed by rotating adjusting screw. And tighten locking
nut.
|