![](../../../img/11/AC206277AC00ENG.png)
|
1.Use special tool flywheel
stopper (MD998781) to secure the flywheel
<M/T> or A/T drive plate
<A/T>. 2.Remove the flywheel
bolts <M/T> or A/T drive plate bolts
<A/T>.
|
![](../../../img/11/ACX00356AB00ENG.png)
|
1.Apply a small amount of
engine oil to the entire inner diameter of the crankshaft
rear oil seal lip. 2.Use the special tool
Crankshaft rear oil seal installer (MD998718) to press-fit
the crankshaft rear oil seal.
|
![](../../../img/11/AC511484AB00ENG.png)
|
Install the crankshaft A/T
drive plate adapter and A/T drive plate adapter plate
on the A/T drive plate in the direction shown in the
illustration.
|
![](../../../img/11/AC206277AC00ENG.png)
|
1.Use special tool flywheel
stopper (MD998781) to secure the flywheel
<M/T> or A/T drive plate
<A/T> in the same manner as
removal. 2.Tighten the flywheel bolts
<M/T> or A/T drive plate bolts
<A/T> to the specified
torque.
Tightening
torque:
73.5 ± 2.0 N·m
<M/T> 74 ± 1
N·m <A/T>
|
![](../../../img/11/ACX00363AD00ENG.png)
|
1.Apply a small amount of
engine oil to the entire inner diameter of the crankshaft
front oil seal lip. 2.Apply a small amount of
engine oil to the outer diameter of special tool crankshaft
front oil seal installer (guide) (MD998717) and install it
to the crankshaft. 3.Use special tool crankshaft
front oil seal installer (MD998717) to press-fit the
crankshaft front oil seal.
|
![](../../../img/11/AC607005AB00ENG.png)
|
To prevent the crankshaft pulley
mounting bolt from being loosened, wipe off the dirt on the
crankshaft sprocket and the crankshaft as shown in the
figure. Also, wipe off the dirt on the crankshaft spacer,
crankshaft sensing blade, crankshaft sprocket, and
crankshaft as shown in the figure. Then degrease the areas,
and install them.
|