![](../../../img/11/ACX00536AC00ENG.png)
|
1.Check for oil leak from
seal, and replace it if leak is detected. 2.Check
for wear or damage at the top of the rod. Replace it, if
required.
|
![](../../../img/11/AC511371AB00ENG.png)
|
3.While holding the timing
belt tensioner adjuster with your hand, press the end of the
pushrod against a metal surface (such as the cylinder block)
with a force of 98 -
196
N and measure how far the pushrod is pushed
in.
Standard value: Within 1
mm A: Length when no force is applied B:
Length when force is applied A -
B: Movement in
4.If the measured
value is out of the standard value, replace the timing belt
tensioner adjuster.
|