REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Air Intake Duct Removal and Installation <4M4> (Refer to GROUP 15 - Air Cleaner ).
  • Radiator Shroud Cover (Upper) Removal and Installation (Refer to GROUP 14 - Radiator ).
  • Cooling Fan and Cooling Fan Clutch Removal and Installation <4M4> (Refer to GROUP 14 - Radiator Fan ).




Removal steps


1.
 Vacuum hose


2.
 Brake booster vacuum hose connection <L.H. drive vehicles without ABS>
<<A>>
 >>A<<
 3.
 Engine oil pressure switch connector


4.
 Engine oil pressure switch


5.
 Connector


6.
 Vacuum pump oil pipe


7.
 Vacuum pump oil pipe gasket


8.
 Vacuum pump assembly


9.
 O-ring

REMOVAL SERVICE POINT

<<A>> ENGINE OIL PRESSURE SWITCH REMOVAL

Using special tool oil pressure switch socket wrench (MB992118), removal the engine oil pressure switch.

INSTALLATION SERVICE POINT

>>A<< ENGINE OIL PRESSURE SWITCH INSTALLATION

1.
caution Be careful not to block the oil passage with sealant.
When reusing the sensor, apply the specified sealant to the threads.
Specified sealant: 3M ATD Part No. 8660 or equivalent

2.Tighten the engine oil pressure switch together with the oil filter bracket to the specified torque, using special tool Oil pressure switch socket wrench (MB992118).
Tightening torque: 19 ± 3 N·m