OIL COOLER AND OIL FILTER REMOVAL AND INSTALLATION



Removal steps

>>B<<
 1.
 Oil filter

>>A<<
 2.
 Oil cooler assembly


3.
 O-ring


4.
 Gasket


5.
 Oil cooler element


6.
 Plug


7.
 Bypass valve spring


8.
 Plunger


9.
 Plug


10.
 Regulator valve spring


11.
 Plunger


12.
 Water drain plug


13.
 Oil cooler body


14.
 O-ring


15.
 Gasket


16.
 Water separate lip

INSTALLATION SERVICE POINTS

>>A<< OIL COOLER ASSEMBLY INSTALLATION


    A: 10 × 80
    B: 8 × 75
    C: 8 × 32

>>B<< Oil FILETER INSTALLATION

1.Clean the surface of the oil cooler body which contacts the oil filter.
2.Apply a thin coat of engine oil to the gasket on the oil filter.
3.Holding the gasket in contact with the oil cooler body, tighten the cover 5/8 turn.
caution Use special tool filter wrench (MH061590) to install the oil filter. Tightening it by hand causes oil leakage due to lack of torque.