|
If the idler LH gear bushing to
idler A shaft clearance exceeds the limit, replace the
defective parts.
Standard value:
0.020 - 0.054 mm Limit: 0.10
mm
|
|
If the idler gear bushing to idler
shaft assembly clearance exceeds the limit, replace
the defective parts.
Standard
value: 0.025 - 0.066 mm Limit: 0.10
mm
|
|
1.Shaft to oil pump body and
cover clearances. in either case, if the measurement
exceeds the specified service limit, replace oil
assembly.
Standard value: 0.03
- 0.05 mm Limit: 0.15 mm
|
|
2.Difference between gear
height and oil pump body depth. If the difference exceeds
the specified service limit, replace defective
part.
Standard value: 0.02
- 0.06 mm Limit: 0.10 mm
|
|
3.Gear tooth crest to oil
pump body clearance. If clearance exceeds the specified
service limit, replace defective
part.
Standard value: 0.15
- 0.26 mm Limit: 0.27 mm
|
|
Measure the clearance between rear
bearing and balance shaft. If the reading exceeds the
specified limit, replace the defective
parts
Standard value: 0.070
- 0.136 mm
|