|
1.Check the tension lever
for evidence of cranking, flaking or other defect in the
surface
A that makes sliding contact with the timing chain and in
the surface B that contacts the tensioner. Replace
the tension lever if necessary.
|
|
1.Measure the tension
lever-to-tension lever shaft clearance.If the reading
exceeds the
specified service limit, replace defective
part.
Standard value: 0.06
-
0.18 mm Limit: 0.3 mm
|
|
1.Check the guide plate for
evidence of cracking, flaking or other defect in the surface
A that makes sliding contact with the timing chain. Replace
the guide plate if necessary.
|