REMOVAL AND INSTALLATION



Removal steps


1.
 Injector harness


2.
 Injector and delivery pipe


3.
 Insulator


4.
 Injector support


5.
 Insulator

>>B<<
 6.
 Injector


7.
 O-ring


8.
 Grommet


9.
 Fuel high pressure tube assembly


10.
 Delivery pipe right


11.
 Delivery pipe left

>>A<<
 12.
 Inlet manifold


13.
 Inlet manifold gasket

INSTALLATION SERVICE POINTS

>>A<< INLET MANIFOLD INSTALLATION

1.Tighten the nuts on the right bank to 6.4 N·m.
2.Tighten the nuts on the left bank to the specified torque of 22 ± 1 N·m.
Tighten the nuts on the right bank to the specified torque of 22 ± 1 N·m.
3.Tighten the nuts on the left bank and those on the right bank again in that order.

>>B<< INJECTOR INSTALLATION

1.
caution Use care not to let engine oil enter the delivery pipe.
Insert the injector top end into the delivery pipe. Be careful not to damage the O-ring during installation.