ENGINE OIL REPLACEMENT <4M4>


1.Start the engine and allow it to warm up until the temperature of the engine coolant reaches 80 °C to 90 °C.
2.
warning Use care as engine oil could be hot.
Remove the engine oil filler cap.

3.Remove the engine oil pan drain plug to drain engine oil.
4.Install a new engine oil pan drain plug gasket so that it faces in the direction shown in the illustration, and then tighten the engine oil pan drain plug to the specified torque.
Tightening torque: 39 ± 5 N·m

5.Refill with specified quantity of engine oil.
Specified Engine Oil

    ACEA classification: A1/B1, A3/B3, A3/B4 or A5/B5
    API classification: CD or higher
Total quantity (Includes volume inside engine oil filter and engine oil cooler):

    9.8 L <4M40>
    9.3 L <4M41>
6.Install the engine oil filler cap.
7.Check engine oil level.