THROTTLE BODY (THROTTLE VALVE AREA) CLEANING


caution When throttle body is cleaned, use the M.U.T.-III to initialize the learning value (Refer to GROUP 00, Precautions Before Service - Initialization Procedure for Learning Value in MPI Engine ).
1.Remove the air intake hose from the throttle body.
2.Remove the throttle body assembly.
caution
  • Do not spray the cleaning fluid directly to the throttle valve.
  • Also make sure it does not enter the sensor through the shaft.
3.Spray the cleaning fluid on a clean cloth.
4.Wipe off the dirt around the throttle valve with the cloth sprayed with cleaning fluid.
5.Install the throttle body assembly.
6.Attach the air intake hose.