Actuator Test Reference Table


Item No.
Check item
Drive contents
Inspection conditions
Value to be determined as normal
Code No. or inspection procedure No.
Reference page
1
Engine check lamp
Turn the warning lamp on or off
Ignition switch: ON
The warning lamp turns on.
Procedure No. 2, 3
,
2
Glow lamp
Turn the glow lamp on or off
Ignition switch: ON
The glow lamp turns on.
-
-
3
Glow plug relay
Turning the relay from OFF to ON
Ignition switch: ON
Battery charge is energized to the glow plug when the glow plug relay is ON.
-
-
4
A/C relay
Turning the relay from OFF to ON
Ignition switch: ON
The A/C compressor clutch makes an audible sound.
Procedure No. 23

5
Condenser fan relay
Turning the relay from OFF to ON
Ignition switch: ON
The condenser fan rotates
Procedure No. 22

15
Injector No. 1
Cut off No. 1 injector

  • Ignition switch: ON
  • Engine: Idling
  • Vehicle speed: 0 km/h

ON → OFF
Engine is changed (becomes unstable)
Code No. P0201

16
Injector No. 2
Cut off No. 2 injector

  • Ignition switch: ON
  • Engine: Idling
  • Vehicle speed: 0 km/h

ON → OFF
Engine is changed (becomes unstable)
Code No. P0202

17
Injector No. 3
Cut off No. 3 injector

  • Ignition switch: ON
  • Engine: Idling
  • Vehicle speed: 0 km/h

ON → OFF
Engine is changed (becomes unstable)
Code No. P0203

18
Injector No. 4
Cut off No. 4 injector

  • Ignition switch: ON
  • Engine: Idling
  • Vehicle speed: 0 km/h

ON → OFF
Engine is changed (becomes unstable)
Code No. P0204

19
Suction control valve
Turn the suction control valve from OFF to ON

  • Ignition switch: ON
  • Engine: not running

The suction control valve of supply pump is drived.
Code No. P0089, P0628, P0629
, ,
25
Exhaust gas recirculation valve 0 %
Lift position reaches 0 %

  • Ignition switch: ON
  • Engine: Idling
  • Vehicle speed: 0 km/h

Exhaust gas recirculation valve lift is driven into 0 % position.
-
-
26
Exhaust gas recirculation valve 50 %
Lift position reaches 50 %

  • Ignition switch: ON
  • Engine: Idling
  • Vehicle speed: 0 km/h

Exhaust gas recirculation valve lift is driven into 50 % position.
-
-
27
Exhaust gas recirculation valve 100 %
Lift position reaches 100 %

  • Ignition switch: ON
  • Engine: Idling
  • Vehicle speed: 0 km/h

Exhaust gas recirculation valve lift is driven into 100 % position.
-
-
28
Throttle valve 0 deg
Throttle valve is 0 deg open.

  • Ignition switch: ON
  • Engine: not running

Throttle valve is driven into 0 deg position.
-
-
29
Throttle valve 45 deg
Throttle valve is 45 deg open.

  • Ignition switch: ON
  • Engine: not running

Throttle valve is driven into 45 deg position.
-
-
30
Throttle valve 90 deg
Throttle valve is 90 deg open.

  • Ignition switch: ON
  • Engine: not running

Throttle valve is driven into 90 deg position.
-
-