![](../../../img/13/AK601842AB00ENG.png)
|
1.Disconnect the No. 2
intake air temperature sensor connector. 2.Measure
resistance between terminal No. 1 and No.
2. Standard value:
13 - 18
kΩ (at -20°C) 5.1 - 6.9
kΩ (at 0°C) 2.0 - 3.0 kΩ
(at 20°C) 0.9 - 1.5 kΩ (at
40°C) 0.40 - 0.78 kΩ (at
60°C) 0.23 - 0.42 kΩ (at
80°C)
3.Remove the No. 2
intake air temperature sensor
|
![](../../../img/13/AK501451AC00ENG.png)
|
4.Measure resistance while
heating the sensor using a hair drier. Normal
condition:
|
Temperature
(°C)
|
Resistance
(kΩ)
|
Higher
|
Smaller
|
|
5.If the value deviates from the
standard value or the resistance remains unchanged, replace
the No. 2 intake air temperature sensor
assembly. 6.Install the No.2 intake air
temperature sensor and tighten it to the specified
torque. Tightening torque: 13.5 ± 1.5
N·m
|