Code No. P1274: Supply Pump Protection




OPERATION




FUNCTION




TROUBLE JUDGMENT


Check Conditions
Judgment Criterion

PROBABLE CAUSES




DIAGNOSIS PROCEDURE


STEP 1. M.U.T.-III diagnosis code


Q. Is any other diagnosis code than P1274 output?

Inspection chart for diagnosis codes (Refer to ).
Go to Step 2.

STEP 2. Check suction control valve itself



  • Check suction control valve itself (Refer to ).

Q. Is the check result normal?

Go to Step 3.
Replace the supply pump assembly. After replacing the supply pump, learn the supply pump (Refer to GROUP 00 - Precautions Before Service - What The Common Rail Engine Learns ).

STEP 3. Replace the supply pump assembly.



  • After the supply pump assembly, learn the supply pump (Refer to GROUP 00 - Precautions Before Service - What The Common Rail Engine Learns ).
  • After learning the supply pump assembly, re-check the trouble symptoms.

Q. Does trouble symptom persist?

Go to Step 4.
The check is end.

STEP 4. Replace the common rail assembly and fuel injection tubes.



  • After replacing the common rail assembly and fuel injection tubes, re-check the trouble symptoms

Q. Does trouble symptom persist?

Replace the engine-ECU. When the engine-ECU is replaced, write the chassis number (Refer to GROUP 00 - Precautions Before Service - How to Perform Chassis Number Writing ). After replacing the engine-ECU, register the injector identification code and learn fuel injection (Refer to GROUP 00 - Precautions Before Service - What The Common Rail Engine Learns ).
The check is end.