|
- Measure battery voltage during cranking.
|
|
Q.
Is the check result normal?
|
|
Check
battery (Refer to GROUP 54A - Battery - On-vehicle Service
- Battery test ).
|
|
|
|
- Disconnect connector, and measure at harness side.
- Voltage between terminal No. 101 and earth.
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Check
and repair harness between D-215 (terminal No. 101) engine-ECU connector
and A-03*1 or D-137*2 (terminal No. 5)
intermediate connector.
|
|
|
|
Q.
Does trouble symptom persist?
|
|
Replace the engine-ECU. When the
engine-ECU is replaced, write the chassis number (Refer to GROUP 00 -
Precautions Before Service - How to Perform Chassis Number Writing ). After replacing the
engine-ECU, register the injector identification code and learn fuel
injection (Refer to GROUP 00 - Precautions Before Service -
What The Common Rail Engine Learns ).
|
|
|
|
Intermittent malfunction (Refer to
GROUP 00 - How to Use Troubleshooting/Inspection Service Points
- How to Cope with Intermittent Malfunction ).
|
|
|