![](../../../img/15/AK603861AB00ENG.png)
![](../../../img/15/AK403496AC00ENG.png)
|
1.Connect a manual pump
(pressure-application type) to nipple.
caution |
In order to avoid damage to
the diaphragm, do not apply a
pressure of 115 kPa <4M40> 153 kPa
<4M40> or higher.
|
2.While gradually applying pressure, check
the pressure that begins to activate (approximately
1 mm stroke) the waste gate actuator
rod. Standard
value:
Approximately 96 kPa
<4M40>kPa 118.8 - 124.2 kPa
<4M41>
3.If there is a
significant deviation from the standard value, check the
actuator or
the waste gate valve: replace actuator or turbocharger
assembly if necessary.
|