|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Check that the auto-cruise
control indicator lamp within the combination meter
illuminates
when the "ON/OFF" (MAIN) switch is switched
ON.
3.Press the "ON/OFF" (MAIN) switch
again, and check that the auto-cruise control
indicator lamp within the combination meter goes
out.
|
|
1.Switch ON the
"ON/OFF" (MAIN) switch.
2.Drive at the
desired speed within the range of approximately 40 -
165 km/h.
|
|
3.Push the "COAST/SET"
switch.
4.Check to be sure that when the
"COAST/SET" switch is released the speed is
the desired constant speed.
| note |
If the vehicle speed decreases
to approximately 15 km/h below the set
speed because
of climbing a hill for example, it is normal for
the auto-cruise control to be cancelled. When
the vehicle speed is decelerated to
approximately 40 km/h or less, the
constant speed
driving will be cancelled even if the vehicle
speed is not decelerated 15 km/h or more
from the set speed.
|
|
|
1.Switch ON the
"ON/OFF" (MAIN) switch.
2.Set to the desired
speed within the range of approximately 40 - 165
km/h.
|
|
3.Push the "ACC/RES"
switch.
4.Check to be sure that acceleration
continues while the "ACC/RES" switch is
pushed, and that the speed at the time it was released
becomes the constant driving speed.
| note |
Acceleration can be continued
even if the vehicle speed has passed the
approximately 165
km/h. But the constant driving speed when
the "ACC/RES" switch is released
will be recorded as the approximately 165
km/h <6G7>.
|
|
|
1.Switch ON the
"ON/OFF" (MAIN) switch.
2.Set to the desired
speed within the range of approximately 40 - 165
km/h.
|
|
3.Push the "COAST/SET"
switch.
4.Check to be sure that deceleration
continues while the "COAST/SET" switch
is pushed, and that the speed at the time it was released
becomes the constant driving speed.
| note |
When the vehicle speed reaches
the approximately 40 km/h during
deceleration,
the auto-cruise control will be cancelled
<6G7>.
When the vehicle speed
reaches approximately 40 km/h during
deceleration, the
vehicle is driven at a constant speed of
approximately 40
km/h.<4M41>
|
|
|
1.Switch ON the
"ON/OFF" (MAIN) switch.
2.Set to the desired
speed within the range of approximately 40 - 165
km/h.
|
|
3.When any of the following
operations are performed while at constant speed during
auto-cruise control, check if normal driving is resumed and
deceleration occurs.
(1)
The "CANCEL" switch is pushed.
(2)
The brake pedal is depressed.
(3)
The clutch pedal is depressed
<M/T>.
(4)
The selector lever is moved to the "N" range
<A/T>.
|
|
4.At a vehicle speed of 40
km/h or higher, check if when the "ACC/RES"
switch is pushed, the vehicle speed returns to the speed
before auto-cruise control driving
was cancelled, and constant speed driving
occurs.
5.When the "ON/OFF" (MAIN) switch is
switched to the OFF while driving at constant
speed, check if normal driving is resumed and deceleration
occurs.
|