![](../../../img/17/AK402742AG00ENG.png)
![](../../../img/17/AK502148AA00ENG.png)
|
1.Disconnect the solenoid
valve from the inlet manifold. 2.Disconnect the
harness connector. 3.Connect a hand vacuum pump to
nipple (A) of the solenoid valve (refer to the illustration
at left). 4.Check airtightness by applying a
vacuum with voltage applied directly from the battery
to the purge control solenoid valve and without applying
voltage.
|
Battery
voltage
|
Normal
condition
|
Applied
|
Vacuum leaks
|
Not applied
|
Vacuum
maintained
|
|
5.Measure the resistance between the
terminals of the solenoid valve. Standard
value: 22 - 26 Ω (at
20°C)
|