|
|
1.Remove the exhaust gas
recirculation valve and inspect for sticking, carbon
deposits,
etc. If found, clean with a suitable solvent so that the
valve seats correctly.
|
|
|
2.Connect a hand vacuum pump
to the exhaust gas recirculation valve.
|
|
|
3.Apply 67 kPa of vacuum,
and check that the vacuum is maintained.
|
|
4.Apply a vacuum and check
the passage of air by blowing through one side of the
exhaust
gas recirculation passage.
|
|
Vacuum
|
Passage of
air
|
5.6 kPa or
less
|
Air is not blown
out
|
29 kPa or
more
|
Air is blown
out
|
|
5.Replace the gasket, and tighten to the
specified torque.
Tightening torque: 23 ±
6 N·m
|