|
Apply the specified grease to the
clutch release bearing inside, and fill grease in the
groove. Specified lubricants: Mitsubishi
Part No. 0101011 or equivalent
|
|
Apply the specified grease to
contact surface of release fork and release fork
shaft. Specified lubricants: Mitsubishi Part
No. 0101011 or equivalent
|
|
Press fit the sealing cap into the
transmission as shown. It must be 2 mm below the housing
surface.
|
|
Apply the specified grease to
contact surface of clutch release cylinder and push
rod. Specified lubricants: Mitsubishi Part
No. 0101011 or equivalent
|
|
Apply the specified grease to the
clutch disc splines and rub it in splines with a
brush. Specified lubricants: Mitsubishi Part
No. 0101011 or equivalent
|
|
Install the clutch cover, aligning
its installation position with the dowel pins, and
then tighten the bolts to the specified torque of 19 ±
3 N·m in the order
shown in the illustration.
|