DISASSEMBLY AND REASSEMBLY

			Disassembly steps
		1.	Cap
		2.	Bleeder plug
		3.	Push rod
		4.	Boot
<<A>>	>>A<<	5.	Piston
<<A>>	>>A<<	6.	Piston cup
		7.	Conical spring
	>>A<<	8.	Release cylinder

DISASSEMBLY SERVICE POINT

<<A>> PISTON AND PISTON CUP REMOVAL

warning

Cover with a shop towel to prevent the piston from popping out.
Apply compressed air slowly to prevent brake fluid from splashing.

Remove the piston and piston cup from the release cylinder using compressed air.

REASSEMBLY SERVICE POINT

>>A<< RELEASE CYLINDER, PISTON CUP AND PISTON INSTALLATION

Apply brake fluid to the outer surfaces of the piston and piston cups and inner surface of the release cylinder, and then insert into the release cylinder.
Specified lubricants: Brake Fluid DOT 3 or DOT 4