TRANSFER-ECU TERMINAL VOLTAGE TABLE



note There are two ECUs with the same shape inside the floor console, one above the other. The top ECU is the ASTC-ECU. The bottom ECU is the transfer-ECU.
Terminal No.
Check item
Inspection condition
Standard value
1
Shift actuator
Transfer shift lever position: 2H→4H (or 4H→4HLc, 4HLc→4LLc)
1/2 System voltage → System voltage → 1 V or less → 1/2 System voltage
Transfer shift lever position: 4LLc→4HLc (or 4HLc→4H, 4H→2H)
1/2 System voltage → 1 V or less → 1/2 System voltage
3
Shift actuator
Transfer shift lever position: 2H→4H (or 4H→4HLc, 4HLc→4LLc)
1/2 System voltage → 1 V or less → 1/2 System voltage
Transfer shift lever position: 4LLc→4HLc (or 4HLc→4H, 4H→2H)
1/2 System voltage → System voltage → 1 V or less → 1/2 System voltage
5
Accelerator pedal position sensor (APS) <4M41, 6G7>
Lever position sensor (LPS) <4M40>
Accelerator pedal: Fully closed (engine stopped)
0.5 ± 0.05 V
Accelerator pedal: Fully open (engine stopped)
2.325 ± 0.05 V
6
ASTC-ECU signal (FR)
Ignition switch: ON
1 V or less
7
Front propeller shaft speed sensor
Measure the voltage between terminals 7 and 18 using an oscilloscope.

  • Engine: 2,000 r/min
  • Shift range: 4th
Oscilloscope check procedure (Refer to )
8
ASTC-ECU signal (RL)
Ignition switch: ON
1 V or less
9
Rear propeller shaft speed sensor
Measure the voltage between terminals 9 and 18 using an oscilloscope.

  • Engine: 2,000 r/min
  • Shift range: 4th
Oscilloscope check procedure (Refer to )
10
ASTC-ECU signal (RR)
Ignition switch: ON
1 V or less
13
Power supply
Ignition switch: OFF
1 V or less
Ignition switch: ON
System voltage
18
Sensor earth
At all times
1 V or less
19
ASTC-ECU signal (FL)
Ignition switch: ON
1 V or less
20
Transfer lever switch: 2H
Transfer shift lever position: 2H
System voltage
Transfer shift lever position: Other than the above
1 V or less
21
Transfer lever switch: 4H
Transfer shift lever position: 4H
System voltage
Transfer shift lever position: Other than the above
1 V or less
22
Transfer lever switch: 4HLc
Transfer shift lever position: 4HLc
System voltage
Transfer shift lever position: Other than the above
1 V or less
23
Transfer lever switch: 4LLc
Transfer shift lever position: 4LLc
System voltage
Transfer shift lever position: Other than the above
1 V or less
25
Earth
At all times
1 V or less
26
Earth
At all times
1 V or less
31
Backup power supply
At all times
System voltage
32
Inhibitor switch: N <A/T>
Selector lever position: N
System voltage
Selector lever position: Other than above
1 V or less
34
Stop lamp switch
Brake pedal: Depressed
System voltage
Brake pedal: Released
1 V or less
35
Earth <A/T>
At all times
1 V or less
37
2WD indicator lamp (RL)
Transfer shift lever position: 4HLc <=> 4LLc
System voltage <=> 1 V or less → System voltage
Transfer shift lever position: 2H <=> 4H <=> 4HLc
System voltage
38
4WD indicator lamp (FL)
Transfer shift lever position: 2H
1V or less
Transfer shift lever position: Other than the above
1 V or less <=> System voltage
39
Earth <6G7>
At all times
1 V or less
40
Centre differential lock lamp
Transfer shift lever position: 2H or 4H
System voltage
Transfer shift lever position: 4HLc or 4LLc
1 V or less
41
Solenoid valve A, B
Transfer shift lever position: 2H
1 V or less
Transfer shift lever position: Other than 2H
System voltage
42
Earth
At all times
1 V or less
43
2WD operation detection switch
Transfer shift lever position: 2H
1 V or less
Transfer shift lever position: Other than 2H
10.5 V
44
2WD/4WD detection switch
Transfer shift lever position: 2H or 4H
1 V or less
Transfer shift lever position: 4HLc or 4LLc
10.5 V
45
4H detection switch
Transfer shift lever position: 4H or 4HLc
1 V or less
Transfer shift lever position: 2H or 4LLc
10.5 V
46
Centre differential lock detection switch
Transfer shift lever position: 4HLc or 4LLc
1 V or less
Transfer shift lever position: 2H or 4H
10.5 V
47
4LLc detection switch
Transfer shift lever position: 4LLc
1 V or less
Transfer shift lever position: Other than 4LLc
10.5 V
48
2WD indicator lamp (RR)
Transfer shift lever position: 4HLc <=> 4LLc
System voltage <=> 1 V or less → System voltage
Transfer shift lever position: 2H <=> 4H <=> 4HLc
System voltage
49
4WD indicator lamp (FR)
Transfer shift lever position: 2H
1V or less
Transfer shift lever position: Other than the above
1 V or less <=> System voltage
50
Freewheel engage switch
Transfer position: 2WD
10.5 V
Transfer position: 4WD
1 V or less
52
4LLc indicator lamp
Transfer shift lever position: 4LLc
1V or less
Transfer shift lever position: Other than the above
System voltage