REMOVAL AND INSTALLATION


Pre-removal OperationMove the selector lever to the following positions.

  • Selector lever: N
 Post-installation Operation
  • Transmission Control Cable Adjustment (Refer to ).
  • Check that the selector lever and the transfer control lever are moved to each position smoothly and correctly.




Selector lever assembly removal steps


1.
 Shift knob


2.
 Knob cover


3.
 Sleeve


4.
 Transfer shift lever knob


·
 Shift indicator panel (Refer to GROUP 52A - Floor Consol Assembly ).


5.
 Transfer shift lever switch assembly


6.
 Transfer shift lever switch


7.
 Transfer shift lever switch bracket

>>A<<
 8.
 Shift lock cable unit connection <Vehicles for South Africa>


9.
 Transmission control cable connection


10.
 Selector lever assembly


11.
 Transmission control cable assembly

INSTALLATION SERVICE POINT

>>A<< SHIFT LOCK CABLE UNIT INSTALLATION
1.Provisionally install the selector lever knob, and then move the selector lever to the P position and turn the ignition switch to the LOCK (OFF) position.

2.After installing the rod of the shift lock cable unit to the lock cam of the selector lever assembly, install the bolts of the shift lock cable unit.
Tightening torque: 5.0 ± 1.0 N·m
3.Check the operation of the selector lever assembly (Refer to ).