warning | When removing and installing the shift
lock cable unit, be careful not to hit the SRS-ECU. |
REMOVAL SERVICE POINT |
<<A>> KEY INTERLOCK CABLE REMOVAL |
Turn the ignition switch to the ACC
position, and then pull the key interlock cable out from the
ignition key cylinder. |
INSTALLATION SERVICE POINT |
>>A<< SHIFT LOCK CABLE UNIT INSTALLATION |
1.Provisionally install the
selector lever knob, and then move the selector lever to the
P position and turn the ignition switch to the LOCK (OFF)
position. |
![]() |
2.After installing the rod
of the shift lock cable unit to the lock cam of the selector
lever assembly, install the bolts of the shift lock cable
unit. Tightening torque: 5.0 ± 1.0 N·m 3.Check the operation of the selector lever assembly (Refer to ![]() |