DISASSEMBLY AND REASSEMBLY



Disassembly steps


1.
 Snap ring


2.
 Overdrive planetary carrier

>>D<<
 3.
 Thrust bearing No.5


4.
 Underdrive sun gear

>>C<<
 5.
 Thrust bearing No.6


6.
 Output planetary carrier

>>B<<
 7.
 Stopper plate

>>A<<
 8.
 One-way clutch


9.
 Snap ring


10.
 Low/reverse annulus gear

REASSEMBLY SERVICE POINTS

>>A<< ONE-WAY CLUTCH INSTALLATION

Install the one-way clutch so that the arrow stamp is oriented as shown in the illustration.

>>B<< STOPPER PLATE INSTALLATION

Install the stopper plate onto the low/reverse annulus gear. Make sure that the stopper plate claws are securely engaged in the annulus gear groove.

>>C<< THRUST BEARING No.6 INSTALLATION
caution Take care not to mistake the thrust bearing No.6 mounting direction.

Apply Vaseline or petrolatum jelly on the thrust bearing No.6, and then install on the output planetary carrier.

>>D<< THRUST BEARING No.5 INSTALLATION
caution Take care not to mistake the thrust bearing No.5 mounting direction.

Apply Vaseline or petrolatum jelly on the thrust bearing No.5, and then install on the overdrive planetary carrier.