REMOVAL AND INSTALLATION


caution The parts indicated by * should be temporarily tightened so as to prevent the bushing twisted, and then fully tightened with the vehicle on the earth in the unladen condition.
Pre-removal and Post-installation Operation
  • Under Cover Removal and Installation (Refer to GROUP 51, Under Cover ).
  • Gear Oil Draining and Refill (Refer to ).
  • Driveshaft Removal and Installation (Refer to ).
  • Inner Shaft Removal and Installation (Refer to ).




Differential mount bracket assembly (LH/RH) removal steps

>>A<<
 1.
 Differential mount bracket assembly (RH)

>>A<<
 2.
 Differential mount bracket assembly (LH)



Differential mount bracket assembly (rear) removal steps


3.
 No.2 crossmember


4.
 Differential support bracket


·
 Differential carrier and housing assembly

>>A<<
 5.
 Differential mount bracket assembly (rear)

INSTALLATION SERVICE POINT

>>A<< DIFFERENTIAL MOUNT BRACKET ASSEMBLY INSTALLATION
caution The differential mounting bracket assembly should be temporarily tightened to prevent the bushing twisted, and then fully tightened with the vehicle on the earth in the unladen condition.

Tighten differential mounting insulator in the order of A, B, C, D or A, C, B, D as shown in the figure.