|
1.Park the vehicle on a
flat, level surface.
|
|
2.Move the transmission
control lever to the neutral position or the selector lever
to the "N" position. Then place the transfer sift lever to
the "2H" position. Apply the parking brake. Raise the
vehicle on a jack.
|
|
3.Turn the companion flange
clockwise as far as it will go. Make the mating mark on the
dust cover of the companion flange and on the differential
carrier.
|
|
4.Turn the companion flange
anti-clockwise as far as it will go, and measure the amount
of distance the mating marks moved. Limit: 5
mm 5.If the backlash exceeds the limit
value, remove the differential carrier assembly and check
the following.
- Final drive gear backlash (Refer to .)
- Differential gear backlash (Refer to .)
|