|
1.Remove the filler
plug.
|
![](../../../img/27/AC102739AG00ENG.png)
|
2.Check that gear oil level
is not 5 mm below the bottom of filler plug
hole. 3.If the gear oil level is lower than the
lower limit, add the oil until the level comes to the lower
portion of the filler plug hole. Specified
lubricant : Hypoid gear oil API classification GL-5
or higher Above 10°C: SAE 90 Below
10°C: SAE 80W 4.Tighten the filler
plug to the specified torque. Tightening torque
: 50 ± 10 N·m
|