|
2.Remove the air pipe and
air hose connection.
|
|
3.Connect a pressure gauge
and air regulator to the air pipe.
caution |
Do not apply a higher pressure
so as not to damage the air regulator.
|
4.Adjust the outside air pressure with the
air regulator until the pressure gauge shows approx. 24.5
kPa. 5.Lock the wheel on one side of the vehicle,
and slowly turn the wheel on the other
side. 6.Check for continuity in the rear
differential lock detection switch.
|
Measurement
conditions
|
Specified
condition
|
When air is
applied
|
Continuity (less than
2 ohms)
|
When air is
released
|
Open circuit
|
|
|