REMOVAL AND INSTALLATION


caution When the suspension is adjusted or replaced, the calibration of steering wheel sensor must be performed (Refer to GROUP 35C, On-vehicle Service ). <Vehicles with ASTC>
Pre-removal Operation
  • Under Cover Removal (Refer to GROUP 51, Under Cover ).

 Post-installation Operation
  • Check the Dust Cover for Cracks or Damage by Pushing it with Finger.
  • Under Cover Installation (Refer to GROUP 51, Under Cover ).




Removal steps


1.
 Stabilizer link assembly


2.
 Stabilizer clamp

>>A<<
 3.
 Stabilizer bushing


4.
 Stabilizer bar

INSTALLATION SERVICE POINTS

>>A<< STABILIZER BUSHING INSTALLATION

Install the bushing with its cut line located as shown in the figure.