![](../../../img/33/AC606819AB00ENG.png)
|
1.After shaking the ball
joint stud several times, install the nut to the stud and
use special tool preload socket (MB990326) to measure the
turning torque of the ball joint. Standard
value: 4.9 - 19.6 N·m 2.When
the measured value exceeds the standard value, replace the
stabilizer link. 3.When the measured value is
lower than the standard value, check that the ball joint
turns smoothly without excessive play. If so, it is possible
to re-use that ball joint.
|