![](../../../img/34/AC603170AB00ENG.png)
|
1.After shaking the ball
joint stud several times, install the nut to the stud and
use special tool preload socket (MB990326) to measure the
turning torque of the ball joint. Standard
value : 0.67 - 3.9 N·m 2.If the
measured value exceeds the standard value, replace the toe
control arm assembly. 3.If the measured value is
lower than the standard value, check that the toe control
arm ball joint turns smoothly without excessive play. If so,
it is possible to use that ball joint.
|