LOAD SENSING SPRING LENGTH CHECK AND ADJUSTMENT <Vehicles without ABS>


1.
caution Never support the vehicle with jacks or other similar means.
Park the vehicle on a level ground. The vehicle should be unloaded and supported only by wheels.

2.With the lever pressed all the way to the load sensing proportioning valve side, check whether or not the length (shown in the figure) of the spring (the length between its ends) is the standard value.
Standard value (A): 135 - 139 mm
3.If the spring length is not within the standard value, loosen the bolt attaching the support and adjust the distance by moving the support.