REAR DISC BRAKE ASSEMBLY INSPECTION



  • Check the cylinder for wear, damage or rust.
  • Check the piston surface for wear, damage or rust.
  • Check the caliper body or sleeve for wear.
  • Check pad for damage or adhesion of grease, check the backing metal for damage.

PAD WEAR CHECK
caution
  • Always replace the brake pads as an axle set.
  • If an excessive difference is found in the thickness between the right and left brake pads, check moving parts.

Measure thickness at the thinnest and worn area of the pad. Replace the pad assembly if the pad thickness is less than the limit value.
Standard value: 10.0 mm
Minimum limit: 2.0 mm