ACTUATOR TEST REFERENCE TABLE

The M.U.T.-III activates the following actuators for testing.

note

If the ABS-ECU <Vehicles without ASTC> ASTC-ECU <Vehicles with ASTC> runs down, actuator testing cannot be carried out.
Actuator testing is only possible when the vehicle is stationary.

ACTUATOR TEST SPECIFICATIONS

<Vehicles without ASTC>

M.U.T.-III SCAN TOOL DISPLAY	NO.	ITEM	DRIVE CONTENT	Activation when the system fails
HBB MOTOR	01	Pump motor	Drives the pump motor for one second.	Disabled
HBB BUZZER	02	Buzzer	Drives the buzzer for three seconds.	Disabled

<Vehicles with ASTC>

M.U.T.-III SCAN TOOL DISPLAY	NO.	ITEM	DRIVE CONTENT	Activation when the system fails
HBB MOTOR	11	Pump motor	Drives the pump motor for one second.	Disabled
HBB BUZZER	12	Buzzer	Drives the buzzer for three seconds.	Disabled
BRKE WARN LMP	23	Brake warning lamp	Make the brake warning lamp flash twice.	Enabled (However, disabled when the brake warning lamp can not be activated)