|
1.Pull the parking brake
lever with a force of approx. 200 N and count the number of
notches. Standard value: 6 - 7
notches
|
|
2.If the parking brake lever
stroke is not the standard value, adjust as described
below. (1)
Remove the cup holder, and then loosen the adjusting nut to
move it to the cable rod end so that the cable will be
free. (2)
Remove the rear wheels. (3)
Remove the adjustment hole plug of the rear brake backing
plate <Short wheelbase, Long wheelbase-2 800, 3
000> or the rear brake disc <Long wheelbase-3
200, 3 800>, and then use a flat-tip (-) screwdriver
to turn the adjuster in the direction of the arrow (the
direction which expands the shoe) so that the disc will not
rotate. (4)
Return the adjuster six notches <Short wheelbase, Long
wheelbase-2 800, 3 000> or eight notches <Long
wheelbase-3 200, 3 800> in the direction opposite to
the direction of the arrow. (5)
|
caution |
If the parking
brake lever stroke is below the
standard value and the braking is
too firm, the rear brakes may
drag.
|
|
Turn the adjusting nut to adjust the parking brake
lever stroke to the standard value. After adjusting, check
that there is no space between the adjusting nut and the
parking brake lever. (6)
Release the parking brake and turn the rear wheels to check
that the rear brakes are not dragging.
|