|
1.With the engine running
(hydraulic operation), set the front wheels straight
ahead.
|
![](../../../img/37/AC604160AB00ENG.png)
|
2.Measure the play on the
steering wheel circumference before the wheels start to move
when slightly moving the steering wheel in both
directions. Maximum limit: 30
mm 3.When the play exceeds the limit,
check for the play on the steering shaft and steering
linkage connection. Correct or replace. 4.If the
free play still exceeds the limit value, set the steering
wheel straight ahead with the engine stopped. Load 5 N
towards the steering wheel circumference and check the
play. Standard value (steering wheel play with
the engine stopped): 10 mm or less 5.If
the play exceeds the standard value, remove the steering
gear (Refer to ) and check
the total pinion torque (Refer to ).
|