REMOVAL AND INSTALLATION


Pre-removal Operation
  • Battery, Battery Box Removal (Refer to GROUP 54A - Battery ).
  • Radiator Condenser Tank Removal (Refer to GROUP 14 - Radiator )<2800, 3200>.
  • Fuel Temperature Sensor Harness Connector and Suction Control Valve Connector Removal (Refer to GROUP 13C - Fuel Injection Pump < 2800> or GROUP 13D - Supply Pump < 3200>) .
  • Camshaft Position Sensor Removal (Refer to GROUP 13D - Camshaft Position Sensor <3200>) .
  • Vacuum Hose Removal (Refer to GROUP 15 - Intake Manifold ) <2800, 3200>.
  • A/C Drive Belt, A/C Compressor Connector Clamp, A/C Compressor Assembly and A/C Pipe Clamp Bolt Removal (Refer to GROUP 55 - Compressor Assembly ) <3200>.
  • Power Steering Fluid Draining (Refer to ).

 Post-installation Operation
  • Power Steering Fluid Supplying and Bleeding (Refer to ).
  • A/C Pipe Clamp Bolt, A/C Compressor Assembly, A/C Compressor Connector Clamp and A/C Drive Belt Installation (Refer to GROUP 55 - Compressor Assembly ) <3200>.
  • Vacuum Hose Installation (Refer to GROUP 15 - Intake Manifold ) <2800, 3200>.
  • Camshaft Position Sensor Installation (Refer to GROUP 13D - Camshaft Position Sensor <3200>).
  • Suction Control Valve Connector and Fuel Temperature Sensor Harness Connector Installation (Refer to GROUP 13C - Fuel Injection Pump <2800> or GROUP 13D - Supply Pump <3200>).
  • Radiator Condenser Tank Installation (Refer to GROUP 14 - Radiator ) <2800, 3200>.
  • Battery, Battery Box Installation (Refer to GROUP 54A - Battery ).




Removal steps


1.
 Drive belt (Refer to GROUP 11A - Engine assembly <3000>, or GROUP 11C - Engine assembly <3800>).

>>B<<
 2.
 Suction hose


3.
 Power steering harness


4.
 Eye bolt

>>A<<
 5.
 Pressure tube assembly


6.
 Gasket


7.
 Oil pump assembly


·
 Timing belt idler pulley and timing belt (Refer to GROUP 11A - Timing belt <3000>, or GROUP 11C - Timing belt <3800>).


8.
 Power steering pump bracket




Removal steps

>>B<<
 1.
 Suction hose


2.
 Eye bolt


3.
 Gasket


4.
 Pressure hose assembly bolt

>>A<<
 5.
 Pressure hose assembly


6.
 O-ring


7.
 Oil pump assembly




Removal steps


1.
 Power steering pump connector

>>B<<
 2.
 Suction hose


·
 Control wiring harness connection clamp (Refer to GROUP 11G - Engine assembly ).


3.
 Eye bolt


4.
 Pressure hose assembly bolt


·
 A/C Compressor connector (Refer to 55 - Compressor assembly ).

>>A<<
 5.
 Pressure hose assembly


6.
 O-ring


6.
 O-ring


·
 Fuel temperature sensor harness connector (Refer to GROUP 13D - Supply pomp ).


7.
 Oil pump assembly


8.
 O-ring

INSTALLATION SERVICE POINTS

>>A<< PRESSURE TUBE ASSEMBLY INSTALLATION

Place the pressure hose stopper to touch the power steering pump stopper, and install the pressure hose.

>>B<< SUCTION HOSE INSTALLATION

Install the suction hose so that the marking is positioned upward.