|
Check that the door glass moves
while contacting the door glass channel when it is raised
and lowered fully. If not, adjust the door window according
to the following procedures.
|
|
1.Remove the door trim
(Refer to GROUP 52A, Door Trim ).
|
|
2.Remove the waterproof film
(Refer to ).
|
|
3.Loosen the door glass
mounting screw via the adjusting hole with the door window
glass fully closed, then lower the window glass a
little.
|
|
4.Fully close the door
window glass again and tighten the door glass mounting screw
firmly via the adjusting hole.
|